SB Acoustics SB23CACS45-8 8'' Ceramic Cone Woofer

Features

• Soft low damping rubber surround for improved transient response
• Geometrically reinforced ceramic cone for improved break-up control
• Shorting ring in motor system for reduced distortion
• Vented pole piece for reduced compression
• Vented cast aluminium chassis for optimum strength and low compression
• Shallow design
• Non-conducting fibre glass voice coil former for minimum damping
• CCAW voice coil for reduced moving mass
• Long life silver lead wires

Specifications

• Nominal Impedance 8 ?
• DC resistance, Re 5.6 ?
• Voice coil inductance, Le 0.60 mH
• Effective piston area, Sd 216 cm2
• Voice coil diameter 45.5 mm
• Voice coil height 19 mm
• Air gap height 6 mm
• Linear coil travel (p-p) 13 mm
• Magnetic flux density 0.86 T
• Magnet weight 0.8 kg
• Net weight 2.7 kg
• Free air resonance, Fs 25 Hz
• Sensitivity (2.83 V / 1 m) 87.5 dB
• Mechanical Q-factor, Qms 5.41
• Electrical Q-factor, Qes 0.44
• Total Q-factor, Qts 0.40
• Moving mass incl. air, Mms 31. g
• Force factor, Bl 7.9 Tm
• Equivalent volume, VAS 87 liters
• Compliance, Cms 1.31 mm/N
• Mechanical loss, Rms 0.9 kg/s
• Rated power handling* 50 W

* IEC 268-5, T/S parameters measured on drive units that are broken in.