SB Acoustics

SB Acoustics SB26STCN-C000-4 1'' Neodymium Tweeter

Rs. 3,672.00 Rs. 3,400.00 Save 7% Sold out

Price Includes GST

Notify Me When in Stock

SB Acoustics SB26STCN-C000-4 1'' Neodymium Tweeter

Features:

  • Copper cap on pole piece for reduced voice coil inductance and minimum phase shift
  • Fine weave soft fabric dome for smooth frequency response
  • Inherently shielded neodymium motor system
  • Internal pressure equalization and flow resistor for non-resonant coupling of cavities
  • Compact design
  • CCAW voice coil for low-moving mass
  • Long-life silver lead wires
  • Low resonance frequency

Specification:

  • Nominal Impedance 4 Ω
  • DC resistance, Re 3.2 Ω
  • Voice coil inductance, Le 0.04 mH
  • Effective piston area, Sd 6.2 cm2
  • Voice coil diameter 25.4 mm
  • Voice coil height 1.3 mm
  • Air gap height 2.5 mm
  • Linear coil travel (p-p) 1.2 mm
  • Moving mass incl. air, Mms 0.3 g
  • Free air resonance, Fs 960 Hz
  • Sensitivity (2.83 V / 1 m) 92.5 dB
  • Mechanical Q-factor, Qms 1.6
  • Electrical Q-factor, Qes 1.77
  • Total Q-factor, Qts 0.84
  • Force factor, Bl 1.8 Tm
  • Rated power handling* 120 W
  • Magnetic flux density 1.2 T
  • Magnet weight (neo) 21 g
  • Net weight 0.1 kg

* IEC 268-5, high-pass Butterworth, 2600 Hz, 12 dB/Oct.


Customer Reviews

Based on 1 review
0%
(0)
100%
(1)
0%
(0)
0%
(0)
0%
(0)
S
Shuvam
Superb small tweeter for smaller speakers

I'm using this crossed over to a Fostex FF225WK. Not an ideal midbass for a two-way, but in this case there were some special constraints. The little tweeter is beautiful, and has only one small flaw, it can't be crossed over very low, since its Fs is fairly high, almost 1K. Other than that, it's a great tweeter, and because of its smaller flange diameter, it'll be ideal for smaller speakers (mating to 4" or 5" midbass drivers) or for smaller MTM designs. I intend to use this with the SB15CAC in a small standmount MTM two-way too.